Skip to main content
Skip table of contents

Network Requirements

Network Ports

The DVR+O / SCI software utilizes connections on the ports listed below.

Ask your IT Network team to open the following network ports to enable these Services.

If you have a Firewall / Windows Firewall enabled, ensure the DVR+O / SCI application is permitted on Public / Private Networks.

Service

Port #

Description

SubC Inspector API

13000

Main control port for sending and receiving commands from the DVR+O / SCI client to Inspector Desktop client.

SubC Inspector Installer

13001, 80

Note: Ensure Port 80 is open with non-tls/ssl enabled

Remote Control API

8088

Remote API port for controlling the DVR+O / SCI. Please refer to the API Commands section for more information.

Rayfin Data

8886

Allow SubC Rayfin camera data to be available to the DVR+O / SCI.

Video Streaming

9989-9995

Incoming/Outgoing ports for video streams.

DVR+O / SCI is capable of streaming its video Channels when you also subscribe to the SubC Streaming Service. Please refer to the SubC Streaming Service Web User Manual for details on SubC Streaming Services' network ports requirements.

If you encounter any issues connecting the DVR+O / SCI to these ports (potentially due to these ports being disabled or already used by other programs/services) please confirm with your IT Network Administration team before contacting support@subccontrol.com.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.