BPC Unit Installation & Mounting Guide

Installation Instructions

1. Place the mounting feet in one of the two available orientations.

2. The feet can be adjusted slightly before tightening depending on the desired spacing.

3. Tighten the provided (x4) M5x6mm socket cap screws.

4. Clean the bottom of the BPC Unit with Isopropyl alcohol and a clean lint-free cloth.

5. Remove the protective film on one side of the provided thermal gap pad and affix the gap pad to the bottom of the BPC Unit. Press firmly to adhere.

6. Clean the surface you are mounting to with Isopropyl alcohol and firmly press the BPC Unit in place and secure the feet with 4 bolts.
   
   Only mount the BPC Unit to a metal surface for heat sinking. Do not mount to wood, plastic, fiberglass, or other poor thermally conductive materials.
   
   Without Gap Pad: Surface temperature = 65°C
   With Gap Pad: Surface temperature < 45°C