Skip to main content
Skip table of contents

Observatory - Circuit Breaker with Fault Detection

  • This option turns the camera into an Ethernet mux for four devices. Each Aux port has a Resettable Circuit Breaker with fault detection.

  • For protection, there is a current limit of 3.3 amps on Aux0, Aux1, and Aux3. Aux2 has a 5 amp for a Pan-tilt. It will also detect under-voltage, over-voltage, and short circuits and generate a resettable fault. 

  • The expansion output has specific commands in the SubC API. Rayfin Scripting API | Expansion Board

  • The datasheet for this model is here: Datasheet Link

Our customers with the Observatory model have configured their devices as follows:

Aux2 Pan-tilt unit

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.