DBW-5E-E10-C18.5x06.625x12-BLECD
Secure Tow & Drop Winch: Offers safe and efficient subsea retrieval with integrated slip-clutches, manual backups, and corrosion-resistant bearings. Essential for protecting valuable payloads during operations and maximizing user control through electronic and manual braking systems.
Features
|
Torque limiting slip-clutch to allow freewheeling in event of bottom catch |
|
|
Dog clutch for freewheeling, with locking pin |
||
|
4 removable lifting handles |
||
|
Manual disk brake |
||
|
Manual backup hand crank |
||
|
Electronic controller |
||
|
Includes a 3m deck power cable |
||
|
Includes a 10m deck data cable |
||
Mechanical Specifications
|
Drum Capacity: |
410m of 9mm OD cable |
|
Drum Size: |
18” Flange, 6.625” Core, 12” Face width |
|
|
Dimensions Max: |
0.97m(L) x 0.76m(W) x 0.70m(H) |
|
|
Bolt Down Footprint: |
(x4) 3/8” Bolts (24” x 21.75”) |
|
|
Weight: |
113Kg empty (dependent on options) |
|
|
Operating Temperature: |
-20°C to 50°C |
|
|
Strain Relief: |
455 Kgs SWL, >1500 Kgs MBS |
|
|
Strain Relief: |
Polyester Fibre tape |
|
Electronic Specifications
|
Motor: |
1HP, 1800 RPM |
|
Power Requirements: |
110-125 OR 230 VAC, 50/60 Hz, ~15 Amp |
|
|
Controller: |
Variable speed, reverse, power controls, KB Electronics KBRC-240D, 3m deck cable |
|
|
Slip Ring: |
4 Conductors, (2x) 14 Amp, (2x) 2 Amp |
|
|
Deck cable: |
10m terminated from slip-ring |
|
Operational Characteristics
|
Line Speed at Core: |
9.5m/min (31.2ft/min) |
|
Line Speed at Maximum Drum: |
21.1m/min (69.2ft/min) |
|
|
Rated Line Pull at Maximum Drum: |
77Kg (170lbs) |
|
|
Non Backdrivable: |
Drive system gear ratio eliminates back-drivability; no need for an electronic brake |
|
|
Manual Brake: |
Disk brake on spool for braking power during slip and emergency conditions |
|
|
Slip Clutch: |
Adjustable slip clutch set to ~88 kg load |
|
|
Utility Hand “Brake Winch”: |
30m cable for tow system retrieval |
|
|
Winch Load Capability at Full Drum (15.44”) |
77Kg (170 lbs) (Tested to 86.6Kg (191 lbs)) |
|
|
Winch Load Capability at Core (6.625”) |
179.6Kg (396 lbs) (Tested to 201.8Kg (445 lbs)) |
|
|
Slip Range at Full Drum (15.44”) |
88.5Kg - 104.3Kg (195 lbs - 230 lbs) |
|
|
Slip Range at Core (6.625”) |
204.1Kg - 249.5Kg (450 lbs - 550 lbs) |
|
|
Snag Force at Full Drum (15.44”) |
166Kg (366 lbs) |
|
|
Snag Force at Core (6.625”) |
387Kg (852 lbs) |
|
|
Line Speed at Full Drum (15.44”) |
0.352 m/s (1.16 ft/s) |
|
|
Line Speed at Core (6.625”) |
0.158 m/s (0.52 ft/s) |
|
Included Options
|
Mechanically driven level wind for automatic spooling |
|
4-pass slip-ring, (2x) 14 Amp, (2x) 2 Amp Capacity |
|
|
Thermoplastic/stainless steel bearings for weight reduction and corrosion resistance |
|
|
Utility hand “brake winch” for safe tow system retrieval. The automatic brake ensures the load remains suspended when the crank is released to avoid unchecked descent. |
|
|
15m controller extension cable |
Additional Options
|
Joystick remote with proportional speed control, forward/reverse and stop switch |
|
Additional AC or DC power options |
|
|
Additional conductor slip rings |
Shipping Details
|
Reusable pallet plywood shipping crate (International shipping approved) |
|
|
Dimensions: |
1113cm(L) x 93cm(W) x 88cm(H) |
|
|
Weight: |
154Kg - 181Kg (dependent on cable length) |
|
