DVR+O Variant

Blackbox User Manual

Rayfin Visual Script Builder Manual

RCS User Manual

SCI Variant

SubC ReviewStudio Manual

SubC Software - API Commands

API GET Command Syntax: http://ipAddress:13000/api/xxxx/xxxx where ipAddress is that of the SubC Software application host system.

Route/EndPoint

Method

Function

Description

Example Results

http://ipAddress:13000/api/edge/startall

GET

/startall

Start all the enabled Edge channels via a REST api

200 - No reply = Success

Error: 400

Not connected to Edge server.
There are no inputs started on any channels.
There was an error starting the stream.
Please check that the Edge Server is running on port {model.Port} on {model.Address}

http://ipAddress:13000/api/edge/stopall

GET

/stopall

Stop all the enabled Edge channels via a REST api

200 - No reply = Success

Route/EndPoint	Method	Function	Description	Example Results
api/stats	GET	/ping	Replies with true/false if the ping was complete.	`{ "Ping": true }`
api/still	GET	/take/{channelId}	Take picture	None
api/recordersettings	GET	/startall	Start recording on all channels	None
api/recordersettings	GET	/stopall	Stop recording on all channels	None
api/recordersettings	POST	/apply	Apply the settings to the recording VMs.	`{ "Id": 1 "Bitrate":25 "Directory":D:\\folder "DirectoryTemplate":${channelname}\${yyyy}\${MM}\${dd} "Encoder":H265 "FilenameTemplate":${channelname}\${yyyy}\${MM}\${dd} "FrameRate":29.97 "IsSmartEncoding":true "ReevaluateTagsOnSplit":true "Resolution":1920x1080 "SplitTimeMinutes":15 }`