Skip to main content
Skip table of contents

Rayfin-HDC-6000-CRE75-DBH13-LO

HD-SDI video over Coax, Ethernet HD video and comms, serial comms

image-20240307-192042.png

Sensor & Lens

Sensor

Type 1/2.4" CMOS 10-bit

Image Size

21MP - 5344 x 4008

Max. Shutter Speed

1/32500

Lens

4.62mm f/2.2

Zoom

21MP sensor zoom (5x optical equivalent)

Focus Range

0.5m to infinity

Internal Recording System

Image Format

JPEG and RAW

Still Rate

3Hz (JPEG) / 0.5Hz (RAW)

Recording Resolution

HD and 4K UHD

Recording Capacity

40hr (HD) / 10.5hr (4K) - 512GB

Recording Format

H.265 and H.264 - MP4

Media Transfer

Live over Ethernet

Clock Sources

Internal and NTP Server

Data Logging

NMEA 0183/2000 format @ 1Hz

Integrated Sensors

Tilt and Roll.

Liquid Optics

Diagonal FOV

70˚ min.

Horizontal FOV

59˚ min.

Vertical FOV

46˚ min.

Distortion

2.60%

Live Video

Live Video Standards

HD over Coax (HD-SDI)

Ethernet - RTSP H.264

Live Video Resolution

1080/30p/25p

Live Video Latency

85ms ± 25ms

Electrical

Voltage

16.5 - 32.5 Vdc

Power (W)

7.5 (idle) - 8 (recording) - 13.5 (peak)

Control

Ethernet, Serial RS-485

Transmission

No LED: 60m (GigE), 80m (10/100)

2x LED: 20m (GigE), 40m (10/100)

Protection

Short circuit, under/over voltage, ESD, over-temperature

Mechanical

Materials

Sapphire, Grade 5 Titanium

Weight

1.6kg in water, 3.2kg in air

Temperature

-20˚C to +30˚C (In Water)

Depth Rating

6000m

MCBH5F [AUX0 Port]

MCBH5F [AUX1 Port]

CRE Titanium FRM06MCX05002001 [HD over Coax]

DBH13M + DLSA-M [IP video, control and download]

GND

GND

GND

GND

PWR

PWR

PWR

Iso GND (Shield)

(NC on system end)

AUX0 Out

AUX0 Out

N/C

PWR

AUX0 RS-485 B(-)

AUX1 RS-485 B(-)

N/C

(Brown) DD- [GigE]

AUX0 RS-485 A(+)

AUX1 RS-485 A(+)

AUX1 RS-485 B(-)

(White/Brown) DD+ [GigE]

AUX1 RS-485 A(+) (

(Blue) DC+ [GigE]

3G-SDI *Coax Core

(White/Blue) DC- [GigE]

GND *Coax Shield

(Orange) DA- [10/100]

(White/Orange) DA+ [10/100]

(Green) DB- [10/100]

(White/Green) DB+ [10/100]

Cabling Notes

  • SubC bulkheads are wired to Ethernet B standard.

  • 13 pin bulkhead is limited to 4A per pin.

  • The camera automatically limits power to the LEDs.

  • In-line cable part number for Ethernet bulkhead: DIL13F + DLSA-F

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.