Skip to main content
Skip table of contents

Rayfin-HDE-GigE-6000-MINK10-LO-Outputs

Observatory - Ethernet HD video and comms, 4 aux ports

image-20240308-132949.png

Sensor & Lens

Sensor

Type 1/2.4" CMOS 10-bit

Image Size

21MP - 5344 x 4008

Max. Shutter Speed

1/32500

Lens

4.62mm f/2.2

Zoom

21MP sensor zoom (5x optical equivalent)

Focus Range

0.5m to infinity

Internal Recording System

Image Format

JPEG and RAW

Still Rate

3Hz (JPEG) / 0.5Hz (RAW)

Recording Resolution

HD and 4K UHD

Recording Capacity

40hr (HD) / 10.5hr (4K) - 512GB

Recording Format

H.265 and H.264 - MP4

Media Transfer

Live over Ethernet

Clock Sources

Internal and NTP Server

Data Logging

NMEA 0183/2000 format @ 1Hz

Integrated Sensors

Tilt and Roll.

Liquid Optics

Diagonal FOV

70˚ min.

Horizontal FOV

59˚ min.

Vertical FOV

46˚ min.

Distortion

2.60%

Live Video

Live Video Standards

IP Ethernet

Live Video Resolution

1080/30p/25p

Live Video Latency

225ms ± 50ms

Electrical

Voltage

16.5 - 32.5 Vdc

Power (W)

7.5 (idle) - 8 (recording) - 13.5 (peak)

Control

Ethernet, Serial RS-485

Transmission

No LED: 60m (GigE), 80m (10/100)

2x LED: 20m (GigE), 40m (10/100)

Protection

Short circuit, under/over voltage, ESD, over-temperature

Mechanical

Materials

Sapphire, Grade 5 Titanium

Weight

1.6kg in water, 3.2kg in air

Temperature

-20˚C to +30˚C (In Water)

Depth Rating

6000m

MCBH5F AUX 0

Lamp/Strobe

MCBH5F AUX 1

Lamp/Strobe

MCBH5F Aux 2

Pan-Tilt Unit

MCBH3F Aux 3

Parallel Lasers

Seacon MINK10FCRTI003 Ethernet

GND

GND

GND

GND

wht/org) TX+/DA+

Breaker PWR0

Breaker PWR1

Breaker PWR2

Breaker PWR3

(wht/grn) RX+/DB+

Strobe Enable

Strobe Enable

Strobe Enable

org) TX-/DA-

AUX0 RS-485 B(-)

AUX0 RS-485 B(-)

AUX1 RS-485 B(-)

(wht/blu) DC-

AUX0 RS-485 A(+)

AUX0 RS-485 A(+)

AUX1 RS-485 A(+)

(wht/brn) DD+

(grn) RX-/DB-

(blu) DC+

(brn) DD-

GND

Important Notes

  • SubC bulkheads are wired to Ethernet B standard.

  • Aux ports have a 2.5A limit with built in Aux breaker panel. Breakers can be toggled with command API.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.