Skip to main content
Skip table of contents

Orphie

image-20241204-181639.png

Connect to Orphie Underwater IP Cameras

Connect to an Orphie camera through its IP Address to access its video as input to the DVR+O / SCI system Channels.

  1. Back Arrow – Returns to the Input selection screen.

  2. Camera Address - Enter the IP Address of the Orphie camera

  3. Framerate - Select your framerate preference [Default will used the IP camera’s current framerate setting or you can select from range [ 60 | 59.94 | 50 | 30 | 29.97 | 25 ]

  1. Connect - Click to connect to the camera

If you have Orphie Camera Hardware questions or issues, please email support.france@baslerweb.com for Orphie Camera Support.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.