Standard DCS + Optional "Mantaray MK2" Parallel Dot Lasers & Altimeter

SubC Equipment Connection Diagrams

The purpose of this diagram is to ensure the client/user can properly set up and test before using this product in live situations. It can also be used to verify all pieces of equipment are included.

Sensors & Aux Devices

Cable Routing & Connections

Altimeter

The BLUE cable (shown with blue arrow) from the winch connects to the Rayfin camera system in the main bulkhead

1. 1. The cable passes through a woven fiber Kellums Grip for strength and protection.

The single end of the RED Long Y-Splice cable connects to AUX 0 on the Rayfin Mk2 Camera. The two connectors at the other end attach to both Aquorea MK3 LEDs.

The single end of a GREEN Short Y-Splice cable connects to AUX 1 on the Rayfin Mk2 Camera.

1. 1. One connector of the dual end of the Green Y-splice cable connects to the YELLOW altimeter cable.

The MCIL8F end of the YELLOW Altimeter cable plugs into the altimeter bulkhead.

Mantaray

1. The 2nd connector ① on the dual side of the Green Y-splice cable connects to the single connector on a 2nd GREEN Short Y-Splice cable ②. The two remaining connectors on the Y-Splice connect to the bulkheads on the Mantaray Mk2 ③.