Standard DCS + Optional "Single" Skate Mk2

SubC Equipment Connection Diagrams

The purpose of this diagram is to ensure the client/user can properly set up and test before using this product in live situations. It can also be used to verify all pieces of equipment are included.

Sensors & Aux Devices

Cable Routing & Connections

Altimeter

The BLUE cable (shown with blue arrow) from the winch connects to the Rayfin camera system in the main bulkhead

1. 1. The cable passes through a woven fiber Kellums Grip for strength and protection.

The single end of the RED Long Y-Splice cable connects to AUX 0 on the Rayfin Mk2 Camera. The two connectors at the other end attach to both Aquorea MK3 LEDs.

The single end of a GREEN Short Y-Splice cable connects to AUX 1 on the Rayfin Mk2 Camera.

1. 1. One connector of the dual end of the Green Y-splice cable connects to the YELLOW altimeter cable.

The MCIL8F end of the YELLOW Altimeter cable plugs into the Altimeter bulkhead.

Mantaray

1. The 2nd connector on the dual side of the Green Y-splice cable connects to the bulkhead on the Skate Mk2.