Rayfin
Rayfin Camera Input
Select Rayfin as the Channel Input type.
If you have Rayfin cameras attached to your Network, the DVR+O / SCI software will automatically detect and display them so you can conveniently select a Rayfin camera from the list.
Alternatively, you can enter the Rayfin camera Serial Number or IP Address
Camera Address - Enter the Rayfin Serial Number (i.e. 00126 ) or its IP Address
Default or select UDP or TCP options from this drop-down field
Parameters - This field is for setting optional connection parameters.
The Parameters field will only appear if you activate it by selecting Menu → Settings → Admin Settings → Show RTSP connection parameters
The green arrow displayed next to the 4th Rayfin Camera shown in the image above indicates that there is a newer version of Rayfin ROM & Firmware available for this camera. See Upgrade Rayfin Camera ROM & Firmware for details on how to run this upgrade.
If your Rayfin camera is v3, do not use this green arrow method to upgrade to v4. See FAQ → CLI-How to Upgrade Rayfin Camera from v3 to v4 for instructions.
Do not select the same Rayfin Camera for more than one Channel, as this will result in a camera conflict error when recording and taking stills/frame grabs.
The view of the Rayfin will be presented in the center Main View.
Click on the Folder/Filename Settings button (on the bottom, right) to set your Directory path, Directory Template, Filename Template, and Tags.
The Rayfin Camera Controls appear at the top and along the right & left sides on the DVR+O / SCI UI.
For details see Rayfin Camera Controls
